Material / Common North American die casting specification

A380 Aluminum Die Casting

A common aluminum die casting alloy for housings, covers, brackets and structural components.

A380 Aluminum Die Casting material review

Application-led: Alloy selection
Al / Zn / Mg: Material family
Finishing: Process compatibility
RFQ: Drawing-controlled

01 / Material

A380 Aluminum Die Casting selection logic

A380 is widely used for high-pressure die casting where good fluidity, pressure tightness and machining behavior are important. The exact alloy should be confirmed against the application and customer standard.

The alloy page should not replace the customer specification. If the drawing or end market defines a material standard, that controlled requirement takes priority.

Gearbox and motor housings
Power equipment
Electronic enclosures
General structural parts

Technical profile

A380 Aluminum Die Casting planning profile

Use this table for project planning, then confirm every critical value against the approved drawing and process plan.

Alloy family	A380 Aluminum
Casting process	High-pressure die casting by project
Typical applications	Gearbox and motor housings, Power equipment, Electronic enclosures, General structural parts
Material selection	Confirm against customer standard, load case and environment
Finishing	Selected according to alloy, appearance and corrosion requirement
Production data	500,000+ pieces per month; 20+ die casting machines, 160T to 800T

Figures reflect current factory equipment and capacity. Final tolerances, cycle time and lead times are confirmed against the drawing in the quotation.

Project flow

Material selection flow

Each stage produces a decision or document that the next stage depends on. This keeps engineering, purchasing and production aligned.

Application review

Define load, temperature, environment, sealing, weight and appearance requirements.

Alloy comparison

Compare A380 Aluminum against alternative aluminum, zinc or magnesium options.

Process review

Check wall thickness, flow, porosity risk, machining and finishing behavior.

Approval

Confirm the material on the controlled drawing and inspection plan before production.

Buyer questions

Questions to resolve before production.

These answers define the normal project path and the information needed for a useful quotation.

What information is needed for a a380 aluminum die casting review?

Provide the controlled 2D/3D drawing, material requirement, annual quantity, finishing requirement, critical dimensions, target market and delivery date.

Can the project start from a sample or concept?

An initial feasibility discussion is possible, but the quotation and tooling scope should be based on a controlled drawing revision.

How are tolerances set?

Tolerance and inspection requirements are defined from the drawing, critical features, process capability and agreed datum strategy.

How is tooling ownership handled?

Ownership, storage, maintenance and transfer terms are defined in the quotation or supply agreement before the tooling project starts.

Continue through the project path.

Use the internal links to connect the material, process, industry, product and RFQ pages around one project decision.

Send the drawing. Get the engineering questions first.

Include the material, annual quantity, finishing requirement, target market and delivery date. The review can start from STEP, IGS, DWG, DXF, PDF or ZIP files.

Start an RFQ