Industry / Industrial machinery and automation

Industrial Machinery Die Casting for production-ready components

Production equipment parts that need robust geometry, accurate interfaces and repeatable secondary machining.

Upload a drawing Review DFM process

Industrial machinery and automation component planning

Part-led: Application review
Material fit: Al / Zn / Mg options
DFM: Manufacturability review
Inspection: Documented release

01 / Industry

Industrial machinery and automation project requirements

Production equipment parts that need robust geometry, accurate interfaces and repeatable secondary machining.

Each project should answer both commercial and engineering questions: how the part will be produced, how it will be inspected, how the program will be released and what evidence is needed for the target market.

Pump and valve housings
Flow-meter parts
Reducer and motor covers
Robot and automation brackets

Technical profile

Industrial machinery and automation planning profile

Use this table for project planning, then confirm every critical value against the approved drawing and process plan.

Typical parts	Pump and valve housings, Flow-meter parts, Reducer and motor covers, Robot and automation brackets
Recommended materials	ADC12, A380, Zamak 5, AZ91D
Primary process	High-pressure die casting with secondary operations
Critical focus	Drawing-specific: dimensional, sealing, thermal, shielding or structural requirement
Quality documents	Defined by customer and application requirements
Quality system	ISO 9001 and IATF 16949 certified factory

Component requirements differ by program. Inspection scope, documentation and any customer-specific approval are confirmed for each project.

Project flow

Industry project path

Each stage produces a decision or document that the next stage depends on. This keeps engineering, purchasing and production aligned.

Application review

Confirm the operating environment, target market, assembly requirement and commercial volume.

Design review

Check material, geometry, sealing, thermal behavior and secondary operations.

Process validation

Approve the tooling, sample, machining and finishing plan before volume release.

Program documentation

Define the inspection plan, traceability and release documents required by the project.

Buyer questions

Questions to resolve before production.

These answers define the normal project path and the information needed for a useful quotation.

What information is needed for a industrial machinery die casting review?

Provide the controlled 2D/3D drawing, material requirement, annual quantity, finishing requirement, critical dimensions, target market and delivery date.

Can the project start from a sample or concept?

An initial feasibility discussion is possible, but the quotation and tooling scope should be based on a controlled drawing revision.

How are tolerances set?

Tolerance and inspection requirements are defined from the drawing, critical features, process capability and agreed datum strategy.

How is tooling ownership handled?

Ownership, storage, maintenance and transfer terms are defined in the quotation or supply agreement before the tooling project starts.

Continue through the project path.

Use the internal links to connect the material, process, industry, product and RFQ pages around one project decision.

Send the drawing. Get the engineering questions first.

Include the material, annual quantity, finishing requirement, target market and delivery date. The review can start from STEP, IGS, DWG, DXF, PDF or ZIP files.

Start an RFQ